Jiann-Wen Woody Ju

Jiann-Wen Woody Ju

PROFESSOR
CIVIL AND ENVIRONMENTAL ENGINEERING

Boelter Hall 5750

Email:
Phone: (310) 206-1751

RESEARCH AND INTERESTS
Damage mechanics, micromechanics of composites, advanced material modeling, computational mechanics, nanomechanics, nondestructive and destructive testing, durability and damage of concrete and stucco, construction defects, fracture mechanics, biomechanics, failure analysis, geomechnanics, reliability and service life.
PUBLICATIONS
  1. PUBLICATIONS:

    • h-Index = 31, ISI Web of Science; ISI/SCI citations: 4,491 times as of Nov. 25, 2018
    • h-Index = 38.6, Research Gate; RG citations = 5,760 times as of March 26, 2019
    • h-Index = 41; i10-Index = 96, Google Scholar; GS citations = 7,765 times as of June 11, 2019

    A. Papers and Articles in Refereed Journals

    1. Simo, J.C., and Ju, J.W. (1987). “Strain and stress based continuum damage models, Part I: Formulation”, Int. J. Solids & Struct., 23(7), 821-840. [Google Scholar citations: 1,309+ times]
    2. Simo, J.C., and Ju, J.W. (1987). “Strain and stress based continuum damage models, Part II: Computational Aspects”, Int. J. Solids & Struct., 23(7), 841-869. [GS citations: 374+ times]
    3. Simo, J.C., Ju, J.W., Pister, K.S., and Taylor, R.L. (1988). “An assessment of the cap model: consistent return algorithms and rate-dependent extension”, J. of Eng. Mech., ASCE, 114(2), 191-218. [GS citations: 185+ times]
    4. Ju*, J.W., and Taylor, R.L. (1988). “A perturbed Lagrangian formulation for the finite element solution of nonlinear frictional contact problems”, Journal de Mecanique Theorique et Appliquee, 7(S1), 1-14. [GS citations: 96+ times]
    5. Ju*, J.W., Monteiro, P.J.M., and Rashed, A.I. (1989). “On continuum damage of cement paste and mortar as affected by porosity and sand concentration”, J. of Eng. Mech., ASCE, 115(1), 105-130. [GS citations: 29+ times]
    6. Simo, J.C., and Ju, J.W. (1989). “On continuum damage-elastoplasticity at finite strains: A computational framework”, Computational Mechanics, 5(5), 375-400. [GS citations: 62+ times]
    7. Ju*, J.W. (1989). “On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects”, Int. J. Solids & Struct., 25(7), 803-833. [GS citations: 938+ times]
    8. Ju*, J.W. (1989). “On energy-based coupled elastoplastic damage models at finite strains”, J. of Eng. Mech., ASCE, 115(11), 2507-2525. [GS citations: 59+ times]
    9. Simo, J.C., Ju, J.W., and Taylor, R.L. (1989). “Softening response, completeness condition and numerical algorithms for the cap models”, Int. J. for Numer. Meth. in Eng., accepted for publication (49 pages).
    10. DiPasquale, E., Ju, J.W., Askar, A., and Cakmak, A.S. (1990). “On the relation between global damage indices and local stiffness degradation”, J. of Struct. Eng., ASCE, 116(5), 1440-1456. [GS citations: 76+ times]
    11. Ju*, J.W. (1990). “Consistent tangent moduli for a new class of viscoplasticity”, J. of Eng. Mech., ASCE, 116(8), 1764-1779. [GS citations: 83+ times]
    12. Ju*, J.W. (1990), “Isotropic and anisotropic damage variables in continuum damage mechanics”, J. of Eng. Mech., ASCE, 116(12), 2764-2770. [GS citations: 251+ times]
    13. Ju*, J.W. (1991). “On two-dimensional self-consistent micromechanical damage models for brittle solids”, Int. J. Solids & Struct., 27(2), 227-258. [GS citations: 104+ times]
    14. Ju*, J.W. (1991). “A micromechanical damage model for uniaxially reinforced composites weakened by interfacial arc microcracks”, J. of Appl. Mech., ASME, 58(4), 923-930. [GS citations: 38+ times]
    15. Ju*, J.W., and Lee, X. (1991) “Micromechanical damage models for brittle solids. Part I: tensile loadings”, J. of Eng. Mech., ASCE, 117(7), 1495-1515. [GS citations: 130+ times]
    16. Lee, X., and Ju*, J.W. (1991). “Micromechanical damage models for brittle solids. Part II: Compressive loadings”, J. of Eng. Mech., ASCE, 117(7), 1516-1537. [GS citations: 104+ times]
    17. Ju*, J.W. and Tseng, K.H. (1992). “A three-dimensional statistical micromechanical theory for brittle solids with interacting microcracks”, Int. J. of Damage Mechanics, 1(1), 102-131. [GS citations: 55+ times]
    18. Ju*, J.W., and Chen, T.M. (1994). “Effective elastic moduli of two-dimensional brittle solids with interacting microcracks. Part I: basic formulations”, J. of Appl. Mech., ASME, 61, 349-357. [GS citations: 80+ times]
    19. Ju*, J.W., and Chen, T.M. (1994). “Effective elastic moduli of two-dimensional brittle solids with interacting microcracks. Part II: evolutionary damage models”, J. of Appl. Mech., ASME, 61, 358-366. [GS citations: 47+ times]
    20. Ju*, J.W., and Chen, T.M. (1994). “Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities”, Acta Mechanica, 103, 103-121. [GS citations: 229+ times]
    21. Ju*, J.W., and Chen, T.M. (1994). “Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities”, Acta Mechanica, 103, 123-144. [GS citations: 214+ times]
    22. Ju*, J.W., and Chen, T.M. (1994). “Micromechanics and effective elastoplastic behavior of two-phase metal matrix composites”, J. of Eng. Mater. & Technology, ASME, 116, 310-318. [GS citations: 80+ times]
    23. Ju*, J.W., and Tseng, K.H. (1995). “An improved two-dimensional micromechanical theory for brittle solids with many randomly located interacting microcracks”, Int. J. of Damage Mechanics, 4(1), 23-57. [GS citations: 35+ times]
    24. Ju*, J.W. (1996). “On micromechanical evolutionary damage models for polycrystalline ceramics”, Int. J. of Damage Mechanics, 5(2), 113-137. [GS citations: 11+ times]
    25. Ju*, J.W. (1996). Comments and author's reply on “Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities”, Acta Mechanica, 114, 235-239.   (Discussion).
    26. Ju*, J.W., and Tseng, K.H. (1996). “Effective elastoplastic behavior of two-phase ductile matrix composites: A micromechanical framework”, Int. J. Solids & Struct., 33(29), 4267-4291. [GS citations: 76+ times]
    27. Ju*, J.W., and Tseng, K.H. (1997). “Effective elastoplastic algorithms for two-phase ductile matrix composites”, J. of Eng. Mech., ASCE, 123(3), 260-266. [GS citations: 41+ times]
    28. Ju*, J.W. (1997). “Rate dependent damage model for concrete in dynamics”, J. of Eng. Mech., ASCE,123(12), 1326-1327.    (Discussion)
    29. Ju*, J.W., and Zhang, Y. (1998). “A thermomechanical model for airfield concrete pavement under transient high temperature loadings”, Int. J. of Damage Mechanics, 7(1), 24-46. [GS citations: 11+ times]
    30. Ju*, J.W., and Zhang, X.D. (1998). “Micromechanics and effective transverse elastic moduli of composites with randomly located aligned circular fibers”, Int. J. Solids & Struct., 35(9-10), 941-960. [GS citations: 67+ times]
    31. Ju*, J.W., and Zhang, Y. (1998). “Axisymmetric thermomechanical constitutive and damage modeling for airfield concrete pavement under transient high temperatures”, Mechanics of Materials, 29, 307-323. [GS citations: 20+ times]
    32. Ju*, J.W., and Sun, L.Z. (1999). “A novel formulation for the exterior-point Eshelby’s tensor of an ellipsoidal inclusion”, J. of Appl. Mech., ASME, 66(2), 570-574; DOI:10.1115/1.2791090. [GS citations: 144+ times]
    33. Ju*, J.W., and Lee, H.K. (2000). “A micromechanical damage model for effective elastoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding”, Computer Meth. in Appl. Mech. and Eng., 183(3-4), 201-222. [GS citations: 99+ times]
    34. Ju*, J.W., and Sun, L.Z. (2001). “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part I: micromechanics-based formulation”, Int. J. Solids & Struct., 38(2), 183-201. [GS: 161+ times]
    35. Sun, L.Z., and Ju*, J.W. (2001). “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part II: applications”, Int. J. Solids & Struct., 38(2), 203-225. [GS citations: 93+ times]
    36. Ju*, J.W., and Zhang, X.D. (2001). “Effective elastoplastic behavior of ductile matrix composites containing randomly located aligned circular fibers”, Int. J. Solids & Struct., 38(22-23), 4045-4069. [GS citations: 47+ times]
    37. Stewart, J.P., Chu, D.B., Seed, R.B., Ju, J.W., and Perkins, W.J., et al. (2001). “Soil liquefaction from the Chi-Chi, Taiwan, Earthquake of September 21, 1999”, Earthquake Spectra, EERI, 17(A), 37-60. [GS citations: 10+ times]
    38. Ju*, J.W., and Lee, H.K. (2001). “A micromechanical damage model for effective elastoplastic behavior of partially debonded ductile matrix composites”, Int. J. Solids & Struct., 38(36-37), 6307-6332. [GS citations: 108+ times]
    39. Hossain, N., Ju*, J.W., Warneke, B., and Pister, K.S.J. (2001). “Characterization of the Young’s modulus of CMOS thin films”, in Mechanical Properties of Structural Films, ASTM STP 1413 (ISBN 0-8031-2889-4), Ed. by C. Muhlstein and S. Brown, pp. 139-151. (peer-reviewed research paper). [GS citations: 14+ times]
    40. Sun, L.Z., Ju, J.W., and Liu, H.T. (2003). “Elastoplastic modeling of metal matrix composites with evolutionary particle debonding”, Mechanics of Materials, 35, 559-569, Elsevier Sciences. [GS citations: 100+ times]
    41. Sun, L.Z., Liu, H.T., and Ju, J.W. (2003). “Effect of particle cracking on elastoplastic behavior of metal matrix composites”, Int. J. for Numerical Method in Engng., 56, 2183-2198, 2003. [GS citations: 50+ times]
    42. Liu, H.T., Sun, L.Z., and Ju, J.W. (2004). “An interfacial debonding model for particle-reinforced composites”, Int. J. of Damage Mechanics, 13(2), 163-185, 2004, Sage Publications. [GS citations: 50+ times]
    43. Sun, L.Z., and Ju, J.W. (2004). “Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles”, J. of Appl. Mech., ASME, 71, 774-785. [GS citations: 65+ times]
    44. Cope, D., Yazdani, S., and Ju, J.W. (2005). “A method to generate damage functions”, J. of Appl. Mech., ASME, 72, 553-557. [GS citations: 4+ times]
    45. Huang, S.-C., Artyukhin, A.B., Wang, Y., Ju, J.W., Stroeve, P., and Noy, A. (2005). “Persistence length control of the polyelectrolyte layer-by-layer self-assembly on carbon nanotubes”, Journal of the American Chemical Society, 127(41), 14176-14177. [GS citations: 47+ times]
    46. Liu, H.T., Sun, L.Z., and Ju*, J.W. (2006). “Elastoplastic modeling of progressive interfacial debonding for particle-reinforced metal matrix composites”, Acta Mechanica, 181(1-2), 1-17, Springer Publications. [GS citations: 34+ times]
    47. Ju*, J.W., Weng, L.S., and Liu, Y. (2006). “Ultrasonic frequency-dependent amplitude attenuation characteristics technique for concrete”, ACI Materials Journal, 103(3), 177-185.
    48. Ju*, J.W., Ko, Y.F., and Ruan, H.N. (2006). “Effective elastoplastic damage mechanics for fiber reinforced composites with evolutionary complete fiber debonding”, Int. J. of Damage Mechanics, 15(3), 237-265. DOI: 10.1177/1056789506060747, Sage Publications. [GS citations: 51+ times]
    49. Lee, H.K., and Ju*, J.W. (2007). “A three-dimensional stress analysis of a penny-shaped crack interacting with a spherical inclusion”, Int. J. of Damage Mechanics, 16(3), 331-359. DOI: 10.1177/1056789506067934, Sage Publications. [GS citations: 34+ times]
    50. Bazant, Z.P., Yu, Q., Gerstle, W., Hanson, J., and Ju, J.W. (2007). “Justification of ACI-446 proposal for updating ACI code provision for shear design of reinforced concrete beams”, ACI Structural Journal, 104(5), 601-610,Sep-Oct. (2008 Publication Award of Merit, the Structural Engineers Association of Illinois, June 2008)
    51. Huang, S.-C. J., Martinez, J.A., Artyukhin, A.B., Sirbuly, D.J., Wang, Y., Ju, J.W., Stroeve, P., and Noy, A. (2007). “Formation, stability and mobility of one-dimensional lipid bilayer on high curvature substrates”, NanoLetters, 7(11), 3355-3359. DOI: 10.1021/nl071641w, American Chemical Society Publications. [GS citations: 43+ times]
    52. Ju*, J.W., and Oh, S. (2008). “Investigation of the crack-dislocation interaction effects”, Int. J. of Damage Mechanics, 17(3), 223-245. DOI: 10.1177/1056789508089230, Sage Publications. [GS citations: 12+ times]
    53. Ju*, J.W. (2008). “In memoriam of Professor T.H. Lin: A giant and the kindest gentleman”, Int. J. of Damage Mechanics, 17(3), 195-196. DOI: 10.1177/1056789508089126, Sage Publications.
    54. Ju*, J.W., and Ko, Y.F. (2008). “Micromechanical elastoplastic damage modeling for progressive interfacial arc debonding for fiber reinforced composites”, Int. J. of Damage Mechanics, 17(4), 307-356. DOI: 10.1177/1056789508089233, Sage Publications. [GS citations: 56+ times]
    55. Bazant, Z.P., Yu, Q., Gerstle, W., Hanson, J., and Ju, J.W. (2008). “Discussion and Authors’ Closure on [Justification of ACI-446 proposal for updating ACI code provision for shear design of reinforced concrete beams]”, ACI Structural Journal, 105(4), 512-515, July-August.
    56. Lee, H.K., and Ju*, J.W. (2008). “3-D micromechanics and effective moduli for brittle composites with randomly located interacting microcracks and inclusions”, Intl. J. of Damage Mechanics, 17(5), 377-417. DOI: 10.1177/1056789507077439, Sage Publications. [GS citations: 15+ times]
    57. Ju*, J.W., Ko, Y.F., and Ruan, H.N. (2008). “Effective elastoplastic damage mechanics for fiber reinforced composites with evolutionary partial fiber debonding”, Intl. J. of Damage Mechanics, 17(6), 493-537. DOI: 10.1177/1056789507081688, Sage Publications. [GS citations: 39+ times]
    58. Ju*, J.W., and Yanase, K. (2008). “Elastoplastic damage micromechanics for elliptical fiber composites with progressive partial fiber debonding and thermal residual stresses”, Theoretical and Applied Mechanics (An Int. Journal), 35(1-3), 137-170. DOI:10.2298/TAM0802137J. [GS citations: 24+ times]
    59. Ragavendra, N., Ju, J.W., Sayre, J.W., Yeh, M.W., Hirschowitz, S., and Chopra, I. (2008). “In vivo analysis of fracture toughness of a human solid tumor”, Journal of Biological Engineering, 2:12, 2008, published Online (Open Access) on Oct. 16. DOI: 10.1186/1754-1611-2-12, BioMed Central Publications. [GS citations: 6+ times]
    60. Rinaldi, A., Voyiadjis, G.Z., and Ju, J.W. (2009). “Obituary: Professor Dusan Krajcinovic: A biographical sketch”, Intl. J. of Damage Mechanics, 18(3), 105-114. DOI: 10.1177/1056789508097538, Sage Publications.
    61. Ju*, J.W., Ko, Y.F., and Zhang, X.D. (2009). “Multi-level elastoplastic damage mechanics for elliptical fiber reinforced composites with evolutionary fiber debonding”, Intl. J. of Damage Mechanics, 18(5), 419-460. DOI: 10.1177/1056789508097549, Sage Publications. [GS citations: 35+ times]
    62. Ju*, J.W., and Yanase, K. (2009). “Micromechanical elastoplastic damage mechanics for elliptical fiber reinforced composites with progressive partial fiber debonding”, Intl. J. of Damage Mechanics, 18(7), 639-668. DOI: 10.1177/1056789508092418, Sage Publications. [GS citations: 32+ times]
    63. Wang, L.H., Hu, Z.D., Zhong, Z., and Ju, J.W. (2009). “Hamiltonian dynamic analysis of an axially translating beam featuring time-variant velocity”, Acta Mechanica, 206(3-4), 149-161. DOI: 10.1007/s00707-008-0104-9, Springer Publications. [GS citations: 33+ times]
    64. Lin, P.J., and Ju*, J.W. (2009). “Effective elastic moduli of three-phase composites with randomly located and interacting spherical particles of distinct properties”, Acta Mechanica, 208, 11-26. DOI: 10.1007/s00707-008-0114-7, Springer Publications. [GS citations: 27+ times]
    65. Misra, N., Martinez, J.A., Huang, S.-C. J., Stroeve, P., Ju, J.W., Grigoropoulos, C.P., and Noy, A. (2009). “1-D Lipid bilayers on nanotube and nanowire templates: properties and device applications”, Biophysical Journal, 96(3), 52a.
    66. Huang, S.-C. J., Artyukhin, A.B., Misra, N., Martinez, J.A., Stroeve, P., Grigoropoulos, C.P., Ju, J.W., and Noy, A. (2010). “Carbon nanotube transistor controlled by a biological ion pump gate”, Nano Letters, 10(5), 1812-1816 (plus 9 pages of supplementary materials). DOI: 10.1021/nl100499x, American Chemical Society Publications. [GS citations: 75+ times]
    67. Wang, L.H., Hu, Z.D., Zhong, Z., and Ju, J.W. (2010). “Dynamic analysis of an axially translating viscoelastic beam with an arbitrarily varying length”, Acta Mechanica,214 (3), 225-244. DOI: 10.1007/s00707-010-0287-8, Springer Publications. [GS citations: 29+ times]
    68. Li, X.K., Huang, Z.P., and Ju*, J.W. (2010). “Recent advances of damage mechanics in China” (review article)”, Intl. J. of Damage Mechanics, 19(7), 755-765. DOI: 10.1177/1056789509359659, Sage Publications.
    69. Ju*, J.W., and Yanase, K. (2010). “Micromechanics and effective elastic moduli of particle-reinforced composites with near-field particle interactions”, Acta Mechanica, 215 (1), 135-153. DOI: 10.1007/s00707-010-0337-2, Springer Publications. [GS citations: 37+ times]
    70. Ju*, J.W., and Yanase, K. (2011). “Micromechanical effective elastic moduli of continuous fiber-reinforced composites with near-field fiber interactions”, Acta Mechanica, 216 (1), 87-103. DOI: 10.1007/s00707-010-0356-z, Springer Publications. [Web of Science/SCI citations: 28+ times]
    71. Xu, B.W., Ju*, J.W., and Shi, H.S. (2011). “Progressive micromechanical modeling for pullout energy of hooked-end steel fiber in cement-based composites”, Intl. J. of Damage Mechanics, 20(6), 922-938, August. DOI: 10.1177/10567895-10385260, Sage Publications. [GS citations: 20+ times]
    72. Ju*, J.W., and Yanase, K. (2011). “Size-dependent probabilistic micromechanical damage mechanics for particle reinforced metal matrix composites”, Intl. J. of Damage Mechanics, 20(7), 1021-1048, Sep. DOI: 10.1177/10567895-10374165, Sage Publications. [GS citations: 19+ times]
    73. Slowik, V. and Ju, J.W. (2011). “Discrete modeling of plastic cement paste subject to drying”, Cement and Concrete Composites,33(9), 925-935, Oct. DOI: 10.1016/j.cemconcomp.2011.02.001, Elsevier Sciences. [GS citations: 18+ times]
    74. Yanase, K., and Ju*, J.W. (2012). “Effective elastic moduli of spherical particle reinforced composites containing imperfect interfaces”, Intl. J. of Damage Mechanics, 21(1), 97-127, Jan. DOI: 10.1177/10567895-10397076, Sage Publications. [GS citations: 72+ times]
    75. Yang, L.F., Yu, B., and Ju, J.W. (2012). “System reliability analysis of spatial variance frames based on random field and stochastic elastic modulus reduction method”, Acta Mechanica, 223 (1), 109-124. DOI: 10.1007/s00707-011-0546-3, Springer Publications. [GS citations: 10+ times]
    76. Xu, B.W., Ju*, J.W., and Shi, H.S. (2012). “Micromechanical modeling of fracture energy for hooked-end steel fiber reinforced cementitious composites”, Intl. J. of Damage Mechanics, 21(3), 415-439, April. DOI: 10.1177/10567895-10397072, Sage Publications. [GS citations: 12+ times]
    77. Ju*, J.W., Yuan, K.Y., and Kuo, A.W. (2012). “Novel strain energy based coupled elastoplastic damage and healing models for geomaterials- Part I. Formulations”, Intl. J. of Damage Mechanics, 21(4), 525-549, May. DOI: 10.1177/1056789511407359, Sage Publications. [GS citations: 30+ times]
    78. Ju*, J.W., Yuan, K.Y., Kuo, A.W., and Chen, J.S. (2012). “Novel strain energy based coupled elastoplastic damage and healing models for geomaterials- Part II. Computational Aspects”, Int. J. of Damage Mechanics, 21(4), 551-576, May. DOI: 10.1177/1056789511407360, Sage Publications.
    79. Hu, G.J., Zhang, K.S., Huang, S.H., and Ju, J.W. (2012). “Yield surfaces and plastic flow of 45 steel under tension-torsion loading paths”, Acta Mechanica Solida Sinica, 25(4), 348-360, August, Elsevier Publications. [GS citations: 11+ times]
    80. Ju*, J.W., and Yuan, K.Y. (2012). “New strain energy based coupled elastoplastic two-parameter damage and healing models for earth moving processes”, Intl. J. of Damage Mechanics, 21(7), 989-1019, Sept. DOI: 10.1177/1056789511425395, Sage Publications. [GS citations: 21+ times]
    81. Yan, Z.G., Zhu, H.H., Ju, J.W., and Ding, W.Q. (2012). “Full-scale fire tests of RC metro shield TBM tunnel linings”, Construction and Building Materials, 36, 484-494, Nov. DOI: 10.1016/j.conbuildmat.2012.06.006, Elsevier Publications.
    82. Chow, C.L., Ju, J.W., and Sumarac, D.M. (2012). “Chairmen report of the First International Conference on Damage Mechanics, ICDM-1, Belgrade, June 25-27th, 2012”, Intl. J. of Damage Mechanics, 21(8), 1103-1105, Nov. DOI: 10.1177/1056789512459616, Sage Publications.
    83. Ko, Y.F., and Ju*, J.W. (2012). “New higher-order bounds on effective transverse elastic moduli of three-phase fiber reinforced composites with randomly located and interacting aligned circular fibers”, Acta Mechanica, 223 (11), 2437-2458, Nov. DOI: 10.1007/s00707-012-0696-y, Springer Publications. [GS citations: 8+ times]
    84. Ko, Y.F., and Ju*, J.W. (2013). “Effects of fiber cracking on elastoplastic damage behavior of fiber reinforced metal matrix composites”, Intl. J. of Damage Mechanics, 22(1), 48-67, Jan. DOI: 10.1177/1056789511433340, Sage Publications. [GS citations: 17+ times]
    85. Yang, L.F., Chen, Z., Gao, Q., and Ju, J.W. (2013). “Compensation length of two-dimensional chloride diffusion in concrete using a boundary element model”, Acta Mechanica, 224 (1), 123-137, Jan. DOI: 10.1007/s00707-012-0721-1, Springer Publications. [GS citations: 7+ times]
    86. Yan, Z.G., Zhu, H.H., and Ju, J.W. (2013). “Behavior of reinforced concrete and steel fiber reinforced concrete shield TBM tunnel linings exposed to high temperatures”, Construction and Building Materials, 38, 610-618, Jan. DOI: 10.1016/j.conbuildmat.2012.09.019, Elsevier Publications. [Web of Science/SCI citations: 22+ times]
    87. Yuan, K.Y., and Ju*, J.W. (2013). “New strain-energy based coupled elastoplastic damage-healing formulations accounting for effect of matric suction during earth moving processes”, J. of Engineering Mechanics, ASCE, 139 (2), 188-199, Feb. DOI: 10.1061/(ASCE)EM.1943-7889.0000474. [GS citations: 17+ times]
    88. Yanase, K., and Ju*, J.W. (2013). “Toughening behavior of unidirectional fiber reinforced composites containing a crack-like flaw: Matrix crack without fiber break”, Intl. J. of Damage Mechanics, 22(3), 336-355, April. DOI: 10.1177/1056789512446519, Sage Publications. [GS citations: 14+ times]
    89. Yanase, K., Moriyama, S., and Ju, J.W. (2013). “Effects of CNT waviness on the effective elastic responses of CNT-reinforced polymer composites”, Acta Mechanica, 24(7), 1351-1364, June. DOI: 10.1007/s00707-013-0808-3, Springer Publications. [GS citations: 53+ times]
    90. Zhang, G.Q., Suwatnodom, P., and Ju*, J.W. (2013). “Micromechanics of crack bridging stress-displacement and fracture energy in steel hooked-end fiber reinforced cementitious composites”, Intl. J. of Damage Mechanics, 22(6), 829-859, August. DOI: 10.1177/1056789512468356, Sage Publications. [GS citations: 4+ times]
    91. Ko, Y.F., and Ju*, J.W. (2013). “Effective transverse elastic moduli of three-phase hybrid fiber reinforced composites with randomly located and interacting aligned circular fibers of distinct elastic properties and sizes”, Acta Mechanica, 224 (1), 157-182, Jan. DOI: 10.1007/s00707-012-0744-7, Springer Publications. [GS citations: 7+ times]
    92. Zhang, K.S., Shi, Y.K., and Ju, J.W. (2013). “Grain-level statistical plasticity analysis on strain cycle fatigue of a FCC metal”, Mechanics of Materials, 64, 76-90, Sept. DOI: 10.1016/j.mechmat.2013.05.001, Elsevier Publications. [GS citations: 14+ times]
    93. Chang, Y.J., Jiao, G.Q., Zhang, K.S., Wang, B., and Ju, J.W. (2013). “Application and theoretical analysis of C/SiC composites based on continuum damage mechanics”, Acta Mechanica Solida Sinica, 26 (5), 491-499, Oct. DOI: 10.1016/s0894-9166(13)60044-0, Elsevier Publications.  [GS citations: 4+ times]
    94. Hou, P.F., Zhao, M., and Ju, J.W. (2013). “Three-dimensional Green's functions for transversely isotropic thermoporoelastic bimaterials”, Journal of Applied Geophysics, 95, 36-46. DOI: 10.1016/j.jappgeo.2013.05.001, Elsevier Sciences. [GS citations: 11+ times]
    95. Yan, Z.G., Chen, Q., Zhu, H.H., Ju, J.W., Zhou, S., and Jiang, Zhengwu (2013). “A multi-phase micromechanical model for unsaturated concrete repaired using the electrochemical deposition method”, Intl. J. of Solids & Structures, 50(24), 3875-3885, Nov. DOI: 10.1016/j.ijsolstr.2013.07.020, Elsevier Publications. [GS citations: 24+ times]
    96. Yanase, K., and Ju*, J.W. (2014). “Overall elastoplastic damage responses of spherical particle reinforced composites containing imperfect interfaces”, Intl. J. of Damage Mechanics, 23(3), 411-429, April. DOI: 10.1177/1056789513507794, Sage Publications. [GS citations: 11+ times]
    97. Yuan, K.Y., Ju*, J.W., Yuan, W., and Yang, J.M. (2014). “Numerical predictions of mechanical behavior of innovative pothole patching materials featuring high toughness, low viscosity nano-molecular resins”, Acta Mechanica, 225(4), 1141-1151, April. DOI: 10.1007/s00707-03-1066-0, Springer Publications. [GS citations: 4+ times]
    98. Zhu, H.H., Chen, Q., Yan, Z.G., Ju, J.W., and Zhou, S. (2014). “Micromechanical models for saturated concrete repaired by the electrochemical deposition method”, Materials and Structures, 47, 1067-1082, June. DOI: 10.1617/s11527-013-0115-4, Springer Publications. [GS citations: 24+ times]
    99. Zhu, H.H., Zhou, S., Yan, Z.G., Ju, J.W., and Chen, Q. (2015). “A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under tensile loading”, Intl. J. of Damage Mechanics, 24(1), 95-115, Jan. DOI: 10.1177/1056789514522503, Sage Publications. [GS citations: 29+ times]
    100. Zhang, K.S., Ju, J.W., Li, Z.H., Bai, Y.L., and Brocks, W. (2015). “Micromechanics based fatigue life prediction of a polyscrystalline metal applying crystal plasticity”, Mechanics of Materials, 85(6), 16-37, June. DOI:10.1016/j.mechmat.2015.01.020, Elsevier Publications. [Web of Science/SCI citations: 28+ times]
    101. Yang, L.F., Yu, B., and Ju, J.W. (2015). “Incorporated strength capacity technique for limit load evaluation of framed structures under constant loading”, ASCE Journal of Structural Engineering, 141(11): 04015023, 11 pages, November. DOI: 10.1061/(ASCE)ST.1943-541X.0001252. [GS citations: 3+ times]
    102. Chen, Q., Zhu, H.H., Ju, J.W., Guo, F., Wang, L.B., Yan, Z.G., Deng, T., and Zhou, S. (2015). “A stochastic micromechanical model for multiphase composites containing spherical inhomogeneities”, Acta Mechanica, 226, 1861-1880. DOI: 10.1007/s00707-014-1278-y, Springer Publications. [GS citations: 26+ times]
    103. Zhu, H.H., Zhou, S., Yan, Z.G., Ju, J.W., and Chen, Q. (2015). “A 3D analytical model for the probabilistic characteristics of self-healing model for concrete using spherical microcapsule”, Computers and Concrete, 15(1), 37-54, Jan. DOI: 10.12989/cac.2015.15.1.037. Techno Press.
    104. Chen, Q., Zhu, H.H., Yan, Z.H., Ju, J.W., Deng, T., and Zhou, S. (2015). “Micro-scale description of the saturated concrete repaired by the electrochemical deposition method based on self-consistent method”, Chinese Journal of Theoretical and Applied Mechanics, 47(2), 367-371, March. DOI: 10.6052/0459-1879-14-147.
    105. Zhu, H.H., Chen, Q., Ju, J.W., Yan, Z.G., Guo, F., Wang, Y.Q., Jiang, Z.W., Zhou, S., and Wu, B. (2015). “Maximum entropy-based stochastic micromechanical model for a two-phase composite considering the inter-particle interaction effect”, Acta Mechanica, 226, 3069-3084, May. DOI: 10.1007/s00707-015-1375-6, Springer Publications.  [GS citations: 19+ times]
    106. Ju*, J.W. (2015). “In Memoriam of Professor C.L. Chow”, Intl. J. of Damage Mechanics, 24(5), 627-628, July. DOI: 10.1177/1056789515595939, Sage Publications.
    107. Ju*, J.W., and Wu, Y. (2016). “Stochastic micromechanical damage modeling of progressive fiber breakage for longitudinal fiber-reinforced composites”, Intl. J. of Damage Mechanics, 25(2), 203-227, March. DOI: 10.1177/1056789515576863, Sage Publications. [GS citations: 18+ times]
    108. Li, X.K., Du, Y.Y., Duan, Q.L., and Ju, J.W. (2016). “Thermodynamic framework of damage-healing-plasticity and net damage variable for granular materials”, Intl. J. of Damage Mechanics, 25(2), 153-177, March. DOI: 10.1177/1056789515576042, Sage Publications. [GS citations: 5+ times]
    109. Zhang, J., Li, J., and Ju, J.W. (2016). “3D elastoplastic damage model for concrete based on novel decomposition of stress”, Intl. Journal of Solids & Structures, 94-95, 125-137, Sep. DOI: 10.1016/j.ijsolstr.2016.04.038, Elsevier Publications. [GS citations: 7+ times]
    110. Chen, Q., Zhu, H.H., Yan, Z.G., Ju, J.W., Jiang, Z.W., Wang, Y.Q., (2016). “A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects”, Construction & Building Materials, 114, pp. 839-850, July. DOI: 10.1016/j.conbuildmat.2016.04.008, Elsevier Publications. [GS citations: 28+ times]
    111. Nezhad, M.M., Zhu, H.H., Ju, J.W., and Chen, Q. (2016). “A simplified multiscale damage model for the transversely isotropic shale rocks under tensile loading”, Intl. J. of Damage Mechanics, 25(5), 705-726, July. DOI: 10.1177/1056789516639531, Sage Publications.
    112. Zhu, H.H., Zhou, S., Yan, Z.G., Ju, J.W., and Chen, Q. (2016). “A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under compressive loading”, Intl. J. of Damage Mechanics, 25(5), 727-749, July. DOI: 10.1177/1056789516641593, Sage Publications. [GS citations: 14+ times]
    113. Zhou, S., Zhu, H.H., Yan, Z.G., Ju, J.W., and Zhang, L.Y. (2016). “A micromechanical study of the breakage mechanism of microcapsules in concrete using PFC2D”, Construction and Building Materials, 115, 452-463, July. DOI: 10.1016/j.conbuildmat.2016.04.067, Elsevier Publications. [GS citations: 24+ times]
    114. Hong, S., Yuan, K.Y., and Ju*, J.W. (2016). “Initial strain energy based thermo-elastoviscoplastic two-parameter damage-self healing model for bituminous composites- Part I: Formulations”, Intl. J. of Damage Mechanics, 25(8), 1082-1102, Nov. DOI: 10.1177/1056789516651383, Sage Publications. [GS citations: 9+ times]
    115. Hong, S., Yuan, K.Y., and Ju*, J.W. (2016). “Initial strain energy based thermo-elastoviscoplastic two-parameter damage-self healing model for bituminous composites- Part II: Computational aspects”, Intl. J. of Damage Mechanics, 25(8), 1103-1129, Nov. DOI: 10.1177/1056789516651385, Sage Publications. [GS citations: 8+ times]
    116. Chen, Q., Jiang, Z.W., Yang, Z.H., Zhu, H.H., Ju, J.W., Yan, Z.G., and Wang, Y.Q. (2016). “Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method”, Materials and Structures, 49(12), 5183-5193, Dec. DOI: 10.1617/s11527-016-0853-1, Springer Publications.  [GS citations: 12+ times]
    117. Chen, Q., Jiang, Z.W., Zhu, H.H., Ju, J.W., Yan, Z.G., and Wang, Y.Q. (2016). “An improved micromechanical framework for saturated concrete repaired by the electrochemical deposition method considering the imperfect bonding”, Journal of Engineering, vol. 2016, Article ID 1894027, 1-11, August. DOI: 10.1155/2016/1894027, Hindawi Publications.  [GS citations: 2+ times]
    118. Hong, S., Yuan, K.Y., and Ju*, J.W. (2017). “New strain energy based thermo-elastoviscoplastic isotropic damage-self healing model for bituminous composites- Part I: Formulations”, Intl. J. of Damage Mechanics, 26(5), 651-671, July. DOI: 10.1177/1056789515610706, Sage Publications.  [GS citations: 12+ times]
    119. Hong, S., Yuan, K.Y., and Ju*, J.W. (2017). “New strain energy based thermo-elastoviscoplastic isotropic damage-self healing model for bituminous composites- Part II: Computational aspects”, Intl. J. of Damage Mechanics, 26(5), 672-696, July. DOI: 10.1177/1056789515610707, Sage Publications.  [GS citations: 10+ times]
    120. Wu, Y., and Ju*, J.W. (2017). “Elastoplastic damage micromechanics for continuous fiber-reinforced ductile matrix composites with progressive fiber breakage”, Intl. J. of Damage Mechanics, 26(1), 4-28, Jan. DOI: 10.1177/1056789516655671, Sage Publications. [GS citations: 9+ times]
    121. Yang, L.F., Liu, J.M., Yu, B., and Ju, J.W. (2017). “Failure path-independent methodology for structural damage evolution and failure mode analysis of framed structures”, Intl. J. of Damage Mechanics, 26(2), 274-292, March, DOI: 10.1177/1056789516662626, Sage Publications.
    122. Chen, Q., Jiang, Z.W., Yang, Z.H., Zhu, H.H., Ju, J.W., Yan, Z.G., and Wang, Y.Q. (2017). “Differential-scheme based micromechanical framework for unsaturated concrete repaired by the electrochemical deposition method”, Acta Mechanica, 228, 415-431. DOI: 10.1007/s00707-016-1710-6, Springer Publications. [GS citations: 3+ times]
    123. Chen, Q., Jiang, Z.W., Zhu, H.H., Ju, J.W., and Yan, Z.G. (2017). “Micromechanical framework for saturated concrete repaired by the electrochemical deposition method with interfacial transition zone effects”, Intl. J. of Damage Mechanics, 26(2), 210-228, March. DOI: 10.1177/1056789516672163, Sage Publications. [GS citations: 8+ times]
    124. Shao, C.J., Ju, J.W., Han, G.Q., and Qian, Y.J. (2017). “Seismic applicability of a long-span railway concrete upper-deck arch bridge with CFST rigid skeleton rib”, Structural Engineering and Mechanics, 61(5), 645-655, March. DOI: 10.12989/sem.2017.61.5.645, Techno-Press Ltd.
    125. Zhang, Y., Yan, Z.G., Ju, J.W., Zhu, H.H., and Chen, Q. (2017). “A multi-level micromechanical model for elastic properties of hybrid fiber reinforced concrete”, Construction and Building Materials, 152, 804-817, Oct. DOI: 10.1016/j.conbuildmat.2017.07.024, Elsevier Publications. [GS citations: 5+ times]
    126. Zhou, S., Zhu, H.H., Ju*, J.W., Yan, Z.G., and Chen, Q. (2017). “Modeling microcapsule-enabled self-healing cementitious composite materials using discrete element method”, Intl. J. of Damage Mechanics, 26(2), 340-357, March, DOI: 10.1177/1056789516688835, Sage Publications. [GS citations: 16+ times]
    127. Su, G.S., Chen, Z.Y., Ju, J.W., and Jiang, J.Q. (2017). “Influence of temperature on the strainburst characteristics of Granite under true triaxial loading conditions”, Engineering Geology, 222, 38-52, March. DOI: 10.1016/j.enggeo.2017.03.021, Elsevier Publications. [GS citations: 10+ times]
    128. Liu, Gui-Long, Zhang, Ke-Shi, Zhong, Xian-Ci, and Ju, J. Woody (2017). “Analysis of meso-inhomogeneous deformation at a metal material surface under low-cycle fatigue”, Acta Mechanica Solida Sinica, 30, 557-572, December. DOI: 10.1016/j.camss.2017.11.002, Elsevier Publications.
    129. Chen, Q., Zhu, H.H., Ju, J.W., Jiang, Z.W., Yan, Z.G., and Li, H.X. (2018). “Stochastic micromechanical predictions for the effective properties of concrete considering the interfacial transition zone effects”, Intl. J. of Damage Mechanics, 27(8), 1252-1271, August. DOI: 10.1177/ 1056789517728501, Sage Publications. [GS citations: 8+ times]
    130. Chen, Q., Jiang, Z.W., Zhu, H.H., Ju, J.W., Yan, Z.G., and Li, H.X. (2018). “The effective properties of saturated concrete healed by EDM with the ITZs”, Computers and Concrete, 21(1), 67-74, January. DOI: 10.12989/cac.2018.21.1.067, Techno-Press.
    131. Chen, Q., Zhu, H.H., Ju, J.W., Yan, Z.G., Wang, C.H., and Jiang, Z.W. (2018). “A stochastic micromechanical model for fiber reinforced concrete using maximum entropy principle”, Acta Mechanica, 229(7), 2719-2735, July. DOI: 10.1007/s00707-018-2135-1, Springer Publications.  [GS citations: 4+ times]
    132. Zhang, K.S., Brocks, W., Li, Z.H., Ju, J.W., and Bai, Y.L., “Low-cycle fatigue failure and inhomogeneous strain of polycrystalline metals—meso crystal plasticity analysis at elevated temperature”, International Journal of Plasticity, submitted for publication (Oct. 2017), Elsevier Publications.
    133. Chen, Q., Jiang, Z.W., Zhu, H.H., Ju, J.W., Yan, Z.G., Li, H., and Rabczuk, T. (2018). “A multiphase micromechanical model for unsaturated concrete repaired by electrochemical deposition method with the bonding effects”, Intl. J. of Damage Mechanics, 27(9), 1307-1324, September. DOI: 10.1177/1056789518773633, Sage Publications.  [GS citations: 4+ times]
    134. Zhang, Y., Yan, Z.G., Zhu, H.H., and Ju, J.W. (2018). “Experimental study on the structural behaviors of jacking prestressed concrete cylinder pipe”, Tunnelling and Underground Space Technology, 73, 60-70, March. DOI: 10.1016/j.tust.2017.11.033, Elsevier Publications.
    135. Zhang, Y., Ju, J.W., Zhu, H.H., Guo, Q.H., and Yan, Z.G. (2018). “Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete”, Construction & Building Materials, 190, 948-963, Oct. DOI: 10.1016/j.conbuildmat.2018. 09.030, Elsevier Publications. [GS citations: 3+ times]
    136. Su, G.S., Chen, Z.Y., Ju, J.W., Zhao, B., Yan, S.Z., and Yan, Z.F. (2019). “Experimental study of the dynamically induced rockburst of a rock wall with double free faces”, International Journal of Damage Mechanics, 28(4), 611-637, April. DOI: 10.1177/1056789518779070, Sage Publications. [GS citations: 2+ times]
    137. Jiang, Z.W., Yang, X.J., Yan, Z.G., Chen, Q., Zhu, H.H., Wang, Y.Q., Ju, J.W., Fan, Z.H., and Li, H.X. (2019). “A stochastic micromechanical framework for hybrid fiber reinforced concrete”, Cement and Concrete Composites, 102, 39-54, Sept. DOI: 10.1016/ j.cemconcomp.2019.04.003, Elsevier Publications.
    138. Yan, Z.G., Zhang, Y., Ju, J.W., Chen, Q., and Zhu, H.H. (2019). “An equivalent elastoplastic damage model based on micromechanics for hybrid fiber reinforced composites under uniaxial tension”, Intl. J. of Damage Mechanics, 28(1), 79-117, Jan. DOI: 10.1177/1056789517744425, Sage Publications.
    139. Zhang, Y., Ju, J.W., Zhu, H.H., Chen, Q., Guo, Q.H., and Yan, Z.G. (2019). “A novel damage model based on micromechanics for hybrid fiber reinforced cementitious composites under uniaxial compression”, Intl. J. of Damage Mechanics, 28(7), 1095-1132, July. DOI: 10.1177/ 1056789518813270, Sage Publications.
    140. Chen, Z.Y., Su, G.S., Ju, J.W., and Jiang, J.Q. (2019). “Experimental study on energy dissipation of fragments during rockburst process”, Bulletin of Engineering Geology and the Environment, 0(0), 1-18, first published at OnlineFirst on January 26, 2019, DOI: 10.1007/s0064-019-01463-9, Springer Publications.
    141. Zhu, H.H., Chen, Q., Jiang, Z.W., Ju, J.W., Yan, Z.G., Wang, Y.Q., Fan, Z.H., and Li, H.X., “A stochastic micromechanical framework for predicting the probabilistic behaviors of the unsaturated concrete”, Construction & Building Materials, 29 pages, submitted for publications (June 2018), Elsevier Publications.
    142. Zhang, Y., Ju*, J.W., Zhu, H.H., and Yan, Z.G., “A novel multi-scale model for predicting the thermal damage of hybrid fiber reinforced concrete”, Intl. J. of Damage Mechanics, 0(0), 1-26, first published at OnlineFirst on February 20, 2019, DOI: 10.1177/1056789519831554, Sage Publications.
    143. Chang, Y.J., Zhang, J., Song, Q., Mo, D.K., and Ju*, J.W., “Theoretical progressive damage model for bond behavior of plain steel bar-concrete interface”, Intl. J. of Damage Mechanics, 19 pages, submitted for publications (Dec. 2018), Sage Publications.
    144. Chen, Z.Y., Ju, J.W., Su, G.S., Huang, X.H., Li, S., and Zhai, L.J. (2019). “Influence of micro-modulus functions on Peridynamics simulation of crack propagation and branching in brittle materials”, Engineering Fracture Mechanics, 216, 1-16, first published at Online First on June 8, 2019, DOI: 10.1016/j.engfracmech.2019.106498, Elsevier Publications.
    145. Yue, F., Ju*, J.W., Liu, B.W., and Jaisee, S. (2019). “Wind vibration effects on standing scaffolds for tall building construction”, Journal of Construction Engineering and Management, 25 pages, submitted for publication (Oct. 2019), ASCE Press.
    146. Qin, D.W., Ju*, J.W., Zhang, K.S., and Li, Z.S. (2019). “Inhomogeneous deformation growth of a metal under cyclic loading and its influence on fatigue”, Acta Mechanica, 24 pages, accepted for publication (Oct.  2019), Springer Publications.
    147. Han, K.H., Ju, J.W., Kong, H., and Wang, M.S. (2019). “Functional catastrophe analysis of progressive failures for deep tunnel roof considering variable dilatancy angle and detaching velocity”, Rock Mechanics and Rock Engineering, 0(0), 1-11, first published at Online First on April 29, 2019, DOI: 10.1007/s00603-019-01808-6, Springer Publications.
    148. Zhang, Y., Ju, J.W., Chen, Q., Zhu, H.H., Jiang, Z.W., and Yan, Z.G., “Residual bond performance between steel fibers and cementitious matrices after exposure to high temperatures”, Cement and Concrete Composites, 49 pages, submitted for publications (April 2019), Elsevier Publications.
    149. Chen, Q., Ma, R., Jiang, Z.W., Zhu, H.H., Yang, X.W., Ju, J.W., and Yan, Z.G., “Differential scheme based stochastic micromechanical framework for saturated concrete repaired by EDM”, Acta Mechanica, 28 pages, submitted for publications (May 2019), Springer Publications.
    150. Zhang, T., Zhang, Y., Xiao, Z.Q., Yang, Z.L., Zhu, H.H., Ju, J. Woody, and Yan, Z.G. (2019). “Development of a novel bio-inspired cement-based composite material to improve the fire resistance of engineering structures”, Construction & Building Materials, 225, 99-111, Nov. DOI: 10.1016/j.conbuildmat.2019. 07.121, Elsevier Publications.
    151. Chen, Q., Zhu, H.H., Ju, J.W., Yan, Z.G., Jiang, Z.W., Chen, B., Wang, Y.Q., and Fan, Z.H. (2019). “Stochastic micromechanical predictions for the probabilistic behavior of saturated concrete repaired by the EDM”, Intl. J. of Damage Mechanics, 30 pages, accepted for publication (June 2019), Sage Publications.
    152. Kang, A.Z., Zhu, B., Lin, P.Z., Ju, J.W., Zhang, J.W., and Zhang, D.M. (2019). “Experimental and numerical study of the hydrodynamic force coefficients for a round-ended dumbbell shaped bridge cofferdam in waves and currents”, Ocean Engineering, 57 pages, submitted for publication (June 2019), Elsevier Publications.
    153. Ju, M.K., and Ju*, J.W. (2019). “A new formula of punching shear strength for fiber reinforced polymer (FRP) or steel reinforced two-way concrete slabs”, Engineering Structures, 32 pages, submitted for publication (Sep. 2019), Elsevier Publications.
    154. Deng, P., Qin, S.Q., Ju, J.W., Zhang, M., Ma, R.P., Fu, Z.G., and Mei, D.P. (2019). “A novel algorithm for the optimal pre-tension design of cable-stayed bridge”, Computers and Structures, 11 pages, submitted for publication (August 2019), Elsevier Publications.
    155. Zhou, S., and Ju, J.W., (2019). “The damage and healing of quartz under radiation at high temperatures”, Intl. J. of Damage Mechanics, 37 pages, submitted for publication (August 2019), Sage Publications.
    156. Cui, S.A., Guo, C., Li, Z.H., Ju, J.W., and Liu, P. (2019). “Seismic fragility analysis of high-pier continuous rigid frame bridge under the influence of hydrodynamic pressure”, Journal of Bridge Engineering, 27 pages, submitted for publication (September 2019), ASCE Press.

    B. Books and Journals Edited

    1. Damage Mechanics in Engineering Materials, Ed. by J.W. Ju, D. Krajcinovic, and H.L. Schreyer, AMD-Vol. 109 and MD-Vol. 24, ASME Press, New York, Nov. 1990, ISBN 0-7918-0554-9, 276 pages.
    2. Recent Advances in Damage Mechanics and Plasticity, Ed. by J.W. Ju, AMD-Vol. 132 and MD-Vol. 30, ASME Press, New York, April 1992, ISBN 0-7918-0902-1, 297 pages.
    3. Damage Mechanics and Localization, Ed. by J.W. Ju, and K.C. Valanis, AMD-Vol. 142 and MD-Vol. 34 ASME Press, New York, Nov. 1992, ISBN 0-7918-1086-0, 167 pages.
    4. Homogenization and Constitutive Modeling for Heterogeneous Materials, Ed. by C.S. Chang, and J.W. Ju, AMD-Vol. 166, ASME Press, New York, June 1993, ISBN 0-7918-1145-X, 97 pages.
    5. Inelasticity and Micromechanics of Metal Matrix Composites, Ed. by G.Z. Voyiadjis, and J.W. Ju, Elsevier Sciences, Studies in Applied Mechanics 41, published in Dec. 1994, ISBN 0-444-81800-6, 349 pages (15 papers, hard-cover).
    6. Micromechanics of Composites, Ed. By J.W. Ju, Y.D.S. Rajapakse, and G.J. Weng (guest editors), special journal issue of the Journal of Eng. Materials& Tech., ASME, Vol. 116, pp. 255-437, July 1994 (26 papers).
    7. Damage Mechanics in Composites 1994, Ed. by D.H. Allen, and J.W. Ju, AMD-Vol. 185, ASME Press (hard-cover), New York, Nov. 1994, ISBN 0-7918-1423-8, 202 pages.
    8. Numerical Methods in Structural Mechanics, Ed. by J.W. Ju, AMD-Vol. 204, ASME Press, New York, June 1995, ISBN 0-7918-1319-3, 235 pages.
    9. Damage Mechanics in Engineering Materials, Ed. by G.Z. Voyiadjis, J.W. Ju, and J.L. Chaboche, Elsevier Sciences, Studies in Applied Mechanics 46, published in Feb. 1998, ISBN 0-080-43322-7, 546 pages (30 papers, hard-cover).
    10. Advances in Computational Methods for Fracture Mechanics and Localization, Ed. by G.Z. Voyiadjis and J.W. Ju, special journal issue of the Computer Methods in Applied Mechanics and Engineering (an international journal), Vol. 183, No. 1-2, pp. 1-155, also the Preface on pp. 1, March 2000, North-Holland Pub. Co., Elsevier Sciences.
    11. Advances in Computational Methods for Damage Mechanics, Ed. by G.Z. Voyiadjis and J.W. Ju, special journal issue of the Computer Methods in Applied Mechanics and Engineering (an international journal), Vol. 183, No. 3-4, pp. 157-362, also the Preface on pp. 157, March 2000, North-Holland Pub. Co., Elsevier Sciences.
    12. Microstructural Mechanics and Damage Mechanics of Materials, Ed. by L.Z. Sun and J.W. Ju (guest editors), two special journal issues of the Int. Journal of Damage Mechanics, Vol. 15, No. 2 and No. 3, pp. 107-288; also the Preface on pp. 107-108, April-July 2006, Sage Publications, London.
    13. Professor T.H. Lin Memorial Issues, Ed. by L.Z. Sun and J.W. Ju (guest editors),the Int. Journal of Damage Mechanics, Vol. 17, No. 3 and No. 4; also the Preface/Dedication, May and July 2008, pp. 193-356, Sage Publications, London.
    14. Professor Dusan Krajcinovic Memorial Issues, Ed. by A. Rinaldi, G.Z. Voyiadjis and J.W. Ju (guest editors), the Int. Journal of Damage Mechanics, Vol. 18, No. 3, No. 4 and No. 5; also the Preface/Dedication/Obituary, March, April and July 2009, pp. 105-502, Sage Publications, London.
    15. Recent Advances of Damage Mechanics in China (Special Issues), Ed. by X.K. Li, Z.P. Huang and J.W. Ju (guest editors), the Int. Journal of Damage Mechanics, Vol. 19, No. 7 and No. 8, pp. 755-875, Sep. and Oct. 2010; also the Preface, Sep. 2010, pp. 755-765, Sage Publications, London.
    16. Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, two volumes, Ed. by George Z. Voyiadjis, Associate Editor: J.W. Ju, published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9, 1580 pages (hardcover).

    CPapers in Books

    1. Ju, J.W., and Tseng, K.H., “Effective elastoplastic behavior of two-phase metal matrix composites: Micromechanics and computational algorithms”, in Inelasticity and Micro-mechanics of Metal Matrix Composites, pp. 121-141, Ed. by G.Z. Voyiadjis and J.W. Ju, published by Elsevier Sciences, Dec. 1994, ISBN 0-444-81800-6.
    2. Ju, J.W., and Zhang, Y., “Advanced thermomechanical constitutive models for airfield concrete pavement under high temperatures”, in Damage Mechanics in Engineering Materials, pp. 275-286, Ed. by G.Z. Voyiadjis, J.W. Ju and J.L. Chaboche, published by Elsevier Science B.V., Feb. 1998, ISBN 0-080-43322-7.
    3. Ju, J.W., Weng, L.S., Mindess, S., and Boyd, A., “Damage assessment and service life prediction of concrete subject to sulfate attack”, in Materials Science of Concrete: Sulfate Attack Mechanisms, pp. 265-282, Ed. by J. Skalny and J. Marchand, published by the American Ceramics Society, 2000. [GS citations: 16+ times]
    4. Ju, J.W., and Yanase, K., “Size-dependent probabilistic damage micromechanics and toughening behavior of particle/fiber reinforced composites”, in Handbook of Micromechanics and Nanomechanics, Chapter 27, pp. 1033-1066, Ed. by Shaofan Li and Xin-Lin Gao, published by Pan Stanford Publishing, May 2013, ISBN 978-981-4411-23-3 (hardcover).
    5. Ruan, H.N., Luo, M.L., Wang, D., and Ju, J.W., “A general criterion for complex rocks and soils and its application”, in Applied Mechanics and Materials, Vols. 580-583, pp. 243-249, July 2014. DOI: 10.4028/www.scientific.net/AMM.580.583.243, published by Trans Tech Publications, Switzerland.  ISSN: 1662-7482.
    6. Ko, Y.F., and Ju, J.W., “Fiber cracking and elastoplastic damage behavior of fiber reinforced metal matrix composites”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 29, pp. 1023-1053, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
    7. Ju, J.W., and Ko, Y.F., “Micromechanical elastoplastic damage modeling of evolutionary interfacial arc debonding for fiber reinforced composites”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 30, pp. 1055-1092, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
    8. Yuan, K.Y., and Ju, J.W., “New strain-energy based coupled elastoplastic damage-healing mechanics”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 31, pp. 1093-1118, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
    9. Ju, J.W., and Yuan, K.Y., “New strain-energy based coupled elastoplastic two-parameter damage and healing”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 32, pp. 1119-1146, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
    10. Sun, L.Z., Liu, H.T., and Ju, J.W., “Particle-cracking modeling of metal matrix composites”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 33, pp. 1147-1162, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
    11. Sun, L.Z., Liu, H.T., and Ju, J.W., “Particle-debonding modeling of metal matrix composites”, in Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, Chapter 34, pp. 1163-1181, Ed. by George Z. Voyiadjis, J.W. Ju, et al., published by Springer Publications, New York, 2015, ISBN 978-1-4614-5588-2, DOI: 10.1007/978-1-4614-5589-9 (hardcover).
EDUCATION
Ph.D., (1986), University of California, BerkeleyM.S., (1983), University of California, Berkeley
AWARDS AND RECOGNITION
  • The ICDM-3 Lifetime Achievement Medal, the Third International Conference on Damage Mechanics, July 4-6, 2018 (Shanghai, China).
  • EU Academy of Sciences, Member, November 2018—present.
  • Editor-in-Chief, International Journal of Damage Mechanics, July 2015-present (SAGE Publications, London, U.K.). SCI-indexed. Year 2018 Impact Factor = 2.342
  • Editorial Board, Journal of Structural Integrity and Maintenance, January 2016-present (Taylor & Francis Group, London, U.K.). 
  • Editorial Board, Journal of the Chinese Institute of Engineers (JCIE), January 2016-present (Taylor & Francis Group, London, U.K.). SCI-indexed. 
  • Plenary Speaker, the Third International Conference on Damage Mechanics (ICDM-3), at Tongji University, Shanghai, China, July 4-6, 2018.
  • Plenary Speaker, the 11th Frontier Scientists Workshop, sponsored by the Korean Academy of Science and Technology (KAST), at InterContinental Mark Hopkins in San Francisco, July 24-25, 2017, by special KAST invitation only. 
  • Plenary Speaker, the Second International Conference on Damage Mechanics (ICDM-2), at the University of Technology at Troyes, Troyes, France, July 8 and July 9 (twice), 2015.
  • Southwest Jiaotong University Honorary Distinguished Professor (Short-Term Guest), January 2015-present (Chengdu, China).
  • Editorial Advisory Board, Advances in Structural Engineering (An International Journal), January 2014-present (SAGE Publications, London, U.K.). SCI-indexed.
  • ICACM Award, the International Chinese Association for Computational Mechanics, Dec. 2013 (Sydney, Australia).
  • Editorial Board, Frontiers of Structural and Civil Engineering, January 2013-present (Springer Publications).
  • National 1000 Talents Program Distinguished Professor (Short-Term Guest), Central Organization Ministry and Tongji University, 2013-2017 (Shanghai, China).
  • Tongji University Distinguished Chair Professor (Short-Term Guest), 2013-present (Shanghai, China).
  • Guangxi University Distinguished Chair Professor (Short-Term Guest), 2013-present (Nanning, China).
  • External Academic Advisor (EAA), City University of Hong Kong, for the Department of Architecture and Civil Engineering, November 2013-September 2019. 
  • Editor and Editorial Board, Journal of Composites, October 2012-present (Hindawi Publishing Co., New York City, USA).
  • IACM Fellow Award, the International Association for Computational Mechanics, July 2010.
  • Election as Member of the General Council of the International Association for Computational Mechanics (IACM), July 2009-present.
  • Tongji University Chair Professor (Short-Term Guest), 2011-2013 (Shanghai, China).
  • Chang-Jiang Scholar Chair Professor (Short-Term Guest), 2009-2012, Ministry of Education (China), and Guangxi University (Nanning).
  • Kwang-Hua Chair Professor (Short-Term Guest), 2010-2011, Tongji University (Shanghai, China).
  • Associate Editor and Editorial Board, ASCE Journal of Nanomechanics and Micromechanics, Jan. 2010-present (American Society of Civil Engineers, Reston, Virginia, USA). SCI-indexed.
  • ACI Fellow Award, the American Concrete Institute, Nov. 2008. 
  • Invited Visiting Chair Professor (Short-Term Guest), LMT Cachan, ENS Cachan/CNRS and the University of Paris VI, France, AY 2008-2009.
  • Invited Visiting Professor, City University of Hong Kong, November to December 2009, under the Academic Exchange Fund of the City University of Hong Kong.
  • 2008 Publication Award of Merit, the Structural Engineers Association of Illinois, June 2008, for a paper published in the ACI Structural Journal, vol. 104, no. 5, pp. 601-610, Sep./Oct. 2007, by the American Concrete Institute.
  • Editorial Board, Acta Mechanica (An International Journal), March 2008-present (Springer Publications, Wien, Austria). SCI-indexed.
  • Editorial Board, Journal of Chongqing University (English Edition), April 2008-present (Chongqing, China).
  • Editorial Board, Book Series in Computational and Experimental Methods in Structures, June 2008—present, Imperial College Press & World Scientific Publishing Co., USA, UK and Singapore.
  • Engineering Panel Member, Research Grant Council of Hong Kong, Sep. 2008- present.
  • Distinguished Visiting Professor, the Chinese Academy of Sciences, Institute of Mechanics, July-August 2007.
  • Election as General Council Member and Executive Council Member, the International Chinese Association for Computational Mechanics, July 2007-present.
  • Thematic Plenary Speaker, the 2013 Asia-Pacific Congress for Computational Mechanics, Inter-Continental Hotel, Singapore, December 12, 2013
  • Semi-plenary Speaker, the 2013 Chinese Congress on Theoretical and Applied Mechanics, Shaanxi State Hotel, Xi'an, China, August 19, 2013.
  • Plenary Speaker, the Fourth National Symposium on Tunnel, Underground Space, and Transportation Infrastructures, Fuyuan Ambassador Hotel, Enshi, Hubei, China, August 1, 2013.
  • Plenary Speaker, 2013 International Workshop on Life-Cycle Performance of Concrete Structures, Hong Kong Polytechnic University, Hong Kong, June 15, 2013.
  • Plenary Speaker, the First International Conference on Damage Mechanics (ICDM-1), at Serbian Chamber of Engineers, Belgrade, Serbia, June 26, 2012.
  • Semi-plenary Speaker, the 3rd International Symposium on Computational Mechanics (ISCM-3), and the 2nd International Conference on Computational Structural Engineering (CSE-2), National Taiwan University, Taipei, Taiwan, December 5, 2011.
  • Plenary Speaker, the 2nd International Symposium on Computational Mechanics, and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, Hong Kong (Holiday Inn Gold Mile Hotel) and Macau (MGM Grand Hotel), November 30, 2009.
  • Semi-plenary Speaker, International Symposium on Computational Mechanics, Beijing, China, July 30, 2007. 
  • USACM Fellow Award, the U.S. Association for Computational Mechanics, Feb. 2007.
  • Principal Co-Chair of ASME Award Endowments for the “Thomas J.R. Hughes AMD Young Investigator Award” and the “Theodore Belytschko Applied Mechanics Award”, the American Society of Mechanical Engineers, 2006-2007.
  • Elections as USACM Member-at-Large and Executive Committee Member, the U.S. Association for Computational Mechanics, Dec. 2006-2010, and July 2010-2014.
  • ASCE Fellow Election, the American Society of Civil Engineers, Dec. 2006. 
  • Editor, International Journal of Damage Mechanics, Sep. 2006-present (Sage Publications, London, U.K.). SCI-indexed.
  • ASME Fellow Election, the American Society of Mechanical Engineers, Feb. 1998. 
  • 1997 Walter L. Huber Civil Engineering Research Prize, the American Society of Civil Engineers, 1997. (A national distinguished mid-career achievement award)
  • 1991 Presidential Young Investigator Award (1991-98), National Science Foundation and White House.
  • 1991 Alfred Rheinstein Faculty Award, (with $10,000 research award), School of Engineering and Applied Science, Princeton University, May 1991.
  • Editorial Advisory Board, International Journal of Damage Mechanics, since 1991. SCI-indexed.
  • Associate Technical Editor, ASME Journal of Engineering Materials and Technology, 1995—2001. SCI-indexed.
  • Associate Technical Editor, ASME Journal of Applied Mechanics, 1995-2002. SCI-indexed.
  • Citation in Who’s Who in Science and Engineering, by Marquis Who’s Who, 2nd Ed., 1994; 4th Ed., 1998; 5th Ed., 2000-2001; 6th Ed., 2002-2003; 7th Ed., 2003-2004; 8th Ed., 2005-2006; 9th Ed., 2006-2007; 10th Ed., 2008-2009.
  • Citation in Who’s Who in America, by Marquis Who’s Who, 59th Ed., 2005; 60th Ed., 2006; 61st Ed., 2007; 62nd Ed., 2008.
  • Citation in Who’s Who in the West, by Marquis Who’s Who, 29th Ed., 2002; 30th Ed., 2003; 31st Ed., 2004; 32nd Ed., 2005; 33rd Ed., 2006; 34th Ed., 2007.
  • Citation in Who’s Who in Finance and Business, by Marquis Who’s Who, 35th Ed., 2006-2007; 36th Ed., 2008-2009.
  • Citation in Who’s Who in the World, by Marquis Who’s Who, 18th Ed., 2001.
  • Citation in Who’s Who in American Education, by Marquis Who’s Who, 6th Ed., 2004-2005.
  • Citation in 2000 Outstanding Intellectuals of the 21st Century, by International Biographical Center, 1st Ed., 2002 (England).
  • Citation in Strathmore’s Who’s Who, by Strathmore Directories Ltd., 2003-2004 Ed., 2004-2005 Ed., 2005-2006 Ed.
  • Invited participant, 1998 Symposium on Frontiers of Engineering, U.S. National Academy of Engineering, Sep. 17-19, 1998.
  • 2000 ACI-James-Instruments Award for Research in Nondestructive Testing, American Concrete Institute, March 2000. (faculty advisor to the winning research paper by Lisheng Weng and J.W. Ju.)
  • Principal author, LS-DYNA Material Model 25, Geologic Cap model and concrete model since 1988.
  • Principal author, MSC/DYTRAN Material Model, Geologic Cap model and concrete model since 1988.
  • Chairman of American Concrete Institute Committee 446 on “Fracture Mechanics” (2004-2008).
COURSES
C&EE 108L: Experimental Structural MechanicsC&EE 135A: Elementary Structural AnalysisC&EE M230C: Plasticity

UCLA Engineering

×